OSMO Top-Oil Food-Safe Hardwax Oil for Cutting Boards and Butcher Blocks

TOP-OIL HIGH-SOLID FOOD-SAFE HARDWAX-OIL Osmo TopOilHigh Solid is a Food-safe Hardwax-oil wood finish which is extremely tough and hardwearing. It is water repellent and dirt resistant as well as resistant to wine, beer, cola, coffee, tea, fruit juices, milk and water. These types of liquid spillages will tightly bead on the surface without leaving any marks, simply clean by wiping with a cloth. Application Options SPECIFICATIONS Approx. Coverage 258ft2/L with one coat Number of Coats 2 coats: brush 3-4 coats: cloth Application Temp. 5°C to 35°C Approx. Dry Time 8-10hrs. Sizes 5mL, 0.5L ADVANTAGES DIN and EN rated for direct contact with food Ideal for countertops, tabletops, chopping boards, ect. Very durable and hardwearing – water and chemical resistant Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications DOCUMENTATION Product Information MSDS Declaration Application Instructions HOW TO USE BY HAND WITH A CLOTH/RAG Apply three thin coats with a lint-free cloth. Scrub product into wood using cloth in a circular or figure 8 pattern Allow roughly 15-minutes for oils to penetrate Working with the grain, remove all excess product from surface Allow 8-10 hours drying time before recoating Apply second and third coats following previous steps BY HAND WITH A BRUSH Apply two thin coats with an Osmo Natural Bristle Brush or similar brush. With a brush, work product into wood working in all directions, ensuring a thin application Allow roughly 15-minutes for oils to penetrate Working the brush with the grain, evenly distribute all product on surface and remove excess There should be no visible high-build or film – if this is observed, product is over applied Allow 8-10 hours drying time before recoating Apply second coat following above procedure Clean brushes using Osmo Brush Cleaner and Thinner or Turpentine Tinting: Osmo Wood Wax Finish can also be used to lightly tint TopOil 3056 up to a ratio of 10:1. Do not exceed a ratio of 10 parts TopOil 3056 to 1 part Wood Wax Finish.